1. . Download app called TeamTalk from the app store
2. Open up the app
3. Double tap on the “Add” button. (2 right swipes after “Preferences”)
4. Enter the name of our server. Double tap on name edit field and type, Out-Of-Sight (with capital letters on the O O S. Do not forget to include the hyphens)
5. Swipe right, and double tap to open up the Host Address. Type: tt.out-of-sight.net
6. Swipe right and open up the edit field and type the number: 10333 for TCP Port
7. Swipe right again, and enter the same number, 10333 for the UDP Port
8. Swipe right, and enter User Name, which is: [User Name Used on "Become a Member" membership request]
9. Swipe right and enter password, which is : [Type Password] note case sensitive
10. Swipe right and enter Channel name. Type: /Lounge/ (with capital letter “L”)
11. Double tap on the “Save” button to save the info
12. Double tap on “Preferences”
13. Swipe right and enter your nickname, which is: [Chosen Nickname]
14. Swipe several times until you get to Maximum text length. It currently reads 30 characters. You may change this to any length you wish.
15. Swipe several times to, “Show Public Servers”. Double tap to toggle to the off position
16. Swipe right to “Show User Names. Place in the off position.
17. Swipe right to “Sort Channels”. Choose “Popularity”. This will show occupied rooms at the top of the list.
18. Swipe to “Master Volume”. Change this to 100 percent
19. Swipe several times to, “Speaker Output”. Toggle this to the “On” position
20. Next category is “Sound Events”. Go through these and switch on or off whichever ones you would like by using a double tap
21. There is no “Save” button, so go back up to the top of the page, (top left) and double tap on “Server List Back Button”
22. If you are available to go on TeamTalk, swipe over to the “Connect” button and double tap
23. TeamTalk will ask if you allow them to access the microphone. Double tap on the okay button
24. To see the list of rooms, swipe right until you reach the desired room you wish to enter. It is helpful to turn up the volume on your phone before swiping at this point.
25. Double tap on the room name, to select the room.
26. Now, double tap on "Join Channel", (At the top Right of the app) to enter the room.
27. At the bottom of the screen is the “Tx inactive” button. Double tap on this when you wish to speak. It is a toggle, and will read “Tx active” when speaking. Double tap again to stop transmitting
28. Special Note: If you lose the Tx active button, and are trying to unkey, be sure that the "Channels" option is selected at the very bottom, and swipe left to find the Tx active button. You may also need to do a scrub gesture if you accidently get into the Preferences area of the app.
29. To exit, double tap on "Disconnect, which is at the top of the app, or simply use your app switcher to close the open app.